Advantage+ leads campaigns: what Meta turns on, what turns it off, and what its tests claim

An Advantage+ leads campaign is the Leads objective with Advantage+ budget, audience and placements on. What each default does and what switches it off.

An Advantage+ leads campaign is a Leads campaign with three settings left at Meta's defaults: Advantage+ campaign budget, Advantage+ audience and Advantage+ placements. Meta says leads campaigns with Advantage+ on delivered "on average 14% lower cost per lead and 10% lower cost per qualified lead" in early testing. Narrow any of the three too far, for example by excluding a placement or making your audience a hard limit, and the label changes to Advantage+ off: you're back to a manual leads campaign. Every lead ad conversion location still works, and Meta flags that the feature "may not be available to you yet."

What is an Advantage+ leads campaign?

Meta's About Advantage+ leads campaigns page says it "is designed to maximize the performance of your leads campaigns with less set up time and greater efficiency." It isn't a separate objective. You pick Leads in Ads Manager, and the campaign counts as Advantage+ as long as three settings stay broad:

When you create Advantage+ leads campaigns, you'll have Advantage+ on for budget, audience and placements. This means Advantage+ campaign budget, Advantage+ audience and Advantage+ placements are applied by default.

The same mechanism runs Advantage+ sales and app campaigns. How Advantage+ on and off works covers it across all three objectives; the rest of this page is what's specific to leads.

What does Advantage+ change in a leads campaign?

Meta's Create Advantage+ leads campaigns page lists what each default does:

SettingMeta's descriptionWhat it replaces
Advantage+ campaign budget"set a campaign-level budget and optimize it across ad sets in your campaign"Ad set budgets
Advantage+ audience"The recommended setup for audience for at least one ad set." Your audience becomes a suggestion; Meta shows ads "to people matching your suggestion, and other audiences when it's likely to improve performance"Fixed targeting
Advantage+ placements"The recommended setup for placements for all ad sets"A hand-picked placement list

Your conversion location and performance goal stay your choice. Meta selects a default for each, and says "You can change this if you want to select a different conversion location." The about page confirms every lead option still works: "all conversion locations, like lead ads with instant form, website form, calling, and lead ads that click to message", and both goals, "to maximize the number of leads or conversion leads."

Does Advantage+ lower your cost per lead?

Meta claims so, with figures from its own tests:

ComparisonMeta's figurePage
Advantage+ on vs off, leads campaigns"14% lower cost per lead and 10% lower cost per qualified lead"About Advantage+ leads campaigns
Conversion leads goal with CRM via Conversions API vs leads goal"15% reduction in cost per quality lead and 44% increase in rate of lead to quality lead conversion"Create Advantage+ leads campaigns
Lookalike audience as a suggestion, with a customer list"3% lower cost per qualified lead"Create Advantage+ leads campaigns

The first figure is labeled "In early testing" and the others are averages. Meta doesn't give sample sizes, test periods or the advertisers involved, so treat them as Meta's description of its product rather than a forecast for your account. The second number is the larger one, and it comes from the performance goal and the CRM connection rather than from Advantage+ itself.

How do you set up an Advantage+ leads campaign?

Meta's steps, shortened:

  1. In Ads Manager, click + Create, choose Leads and click Continue.
  2. In Budget, leave Campaign budget selected. The Advantage+ on label shows there.
  3. In Conversion, keep or change the conversion location Meta selected, then choose your Facebook Page.
  4. Keep or change the performance goal. If your CRM isn't connected through the Conversions API, Meta shows Get started here and calls it "a best practice".
  5. Optionally add a catalog and product set.
  6. In Audience, leave the recommended setup or open Show more controls, Show suggestions or Further limit the reach of your ads.
  7. Leave Placements with Advantage+ on, then build the ad and publish.

Meta also points to the Campaign opportunities panel on the right of Ads Manager on desktop, which "indicates whether Advantage+ leads campaign is on."

What turns Advantage+ off in a leads campaign?

Narrowing one of the three settings past what Meta treats as broad. The create page:

If you narrow your Budget, Audience or Placements too much, you'll see the Advantage+ off label instead. This means you're no longer creating an Advantage+ leads campaign.

What crosses the line, per Meta's pages:

SectionTurns Advantage+ offDoesn't
BudgetSetting ad set budgets, which the about page names among controls that mean "Advantage+ will turn off"Changing the budget amount or strategy
Audience"if you click Further limit the reach of your ads and then uncheck the box next to Use as a suggestion"Show more controls, Show suggestions, or Further limit alone: these "will not trigger Advantage+ off immediately"
Placements"If you exclude placements in any ad set, or opt out of Mobile or Desktop devices"Account-level controls, which "won't trigger Advantage+ off"

To go back, Meta's fix is in the same panel: "When Advantage+ off is triggered, you go to the Campaign opportunities section and click Apply now to turn Advantage+ leads campaign back on."

One row may already be out of date for your account. The create page still describes excluding placements per ad set, while Meta's What's new in placement settings page says that for leads, app promotion and sales, "you no longer choose placements manually at the ad set level" once the rollout reaches you. Where that's live, the account-level controls are the remaining way to keep ads off a placement, and Meta's placement settings lists what they can and can't exclude.

Should you narrow the audience?

Only where you have to. Meta's suggestion is to feed the system rather than fence it: "Use high-value customer lists from your CRM or website to reach new people likely to be interested in your business", either as a lookalike audience or a custom audience. Used as a suggestion, Meta can still reach past it, and Advantage+ stays on.

If people must never see your ads, such as existing customers or under-18s, Meta's create page points to audience controls and "Ad account settings to limit where ads are shown". Neither turns Advantage+ off.

Which leads campaigns to switch over

  1. Connect your CRM through the Conversions API and use the conversion leads goal if you can judge lead quality. It's the largest of Meta's three figures.
  2. Move hard audience limits into audience controls or account settings, and keep the rest as suggestions.
  3. Leave placements on Advantage+, and use account controls for the few you must exclude.
  4. Combine ad sets that only differ in targeting. Meta says the format "removes the need to run many campaigns with varying targeting and ad creatives."
  5. Check the Campaign opportunities panel before you publish, and click Apply now if it shows Advantage+ off.

Each ad then has to work in every placement it can reach, including Stories, Reels and the Threads feed, which uses your original file even when Advantage+ creative is on.

Sources


Meta rolls these settings out account by account, so check the source and the labels in your own Ads Manager before restructuring a campaign.

Terrads makes each placement's file at its own size, so a lead ad on Advantage+ placements has something built for every frame it lands in.