Ads on Threads: specs, profile rules and what won't deliver there

What Meta says about ads on Threads: sizes and text limits, which profile runs the ad, the formats and goals Threads skips, and a rule its own page contradicts.

Ads on Threads run in the Threads feed, and Meta adds that placement for you whenever you use Advantage+ placements. They take single image, video and image-only carousel ads from 1.91:1 to 9:16, but anything taller than 4:5 is cropped to 4:5. Primary text can be up to 2,200 characters, with 80 to 160 recommended, and the profile running the ad needs a profile picture or the ad won't deliver there. Since September 2026 you can run Threads ads from a Threads profile with no Instagram account behind it. One of Meta's pages still says the opposite.

Where do ads on Threads appear?

In the feed, between posts. Meta's About ads on Threads page says you "can create ads to be delivered in between pieces of content in the Threads feed" and that "The ad placement Threads feed will be automatically selected by default when you use Advantage+ placements."

That default is the part to plan for. If a campaign runs on Advantage+ placements, its ads can already be showing on Threads. Meta's January 2026 announcement, Ads on Threads: One Year In, describes it as "automatically adding Threads placements to Advantage+ and manual campaigns". Check the placement list on each ad set if you don't want them there. Meta's placement settings covers how to remove one.

Ads carry the same label as the rest of Meta now. The help page opens with: "Ads that were previously marked with a 'Sponsored' label will now display an 'Ad' label instead."

What are the ad specs for Threads?

Meta lists them per format on the same page. The image and carousel rows match; video differs on resolution and length. The Threads ad size page has the same figures with a frame to download.

SpecImageVideoCarousel
File type"JPG or PNG are recommended""MP4, MOV and GIF""JPG or PNG are recommended"
Aspect ratio1.91:1 to 9:161.91:1 to 9:161.91:1 to 9:16
Recommended size1440 × 14401440 × 18001440 × 1440
Minimum width500 pixels500 pixels500 pixels
Length—Up to 500 seconds2 to 10 cards
Primary text80–160 characters recommended, 2,200 maximum, up to 30 hashtagsSameSame
Headline40 characters40 characters40 characters

Three lines in those specs stop delivery rather than just looking worse:

  • Width: "If your image or video is narrower, your ad won't be delivered on Threads."
  • Text: "If your primary text is longer, your ad won't be delivered on Threads."
  • Length: "Longer videos won't be delivered on Threads."

Two smaller rules sit in the notes. "URLs are not supported in primary text", so a link pasted into the copy won't work, and for video, "Video captions are not supported." If your video depends on captions, burn them into the frame.

How does Threads crop a vertical ad?

To 4:5. Meta accepts 9:16 files, but for images it says "Images with a taller ratio than 4:5 will be cropped and vertically centered to 4:5", and for video, "Videos with a taller ratio than 4:5 will be cropped and centered to 4:5."

A Story or Reels file sent to Threads therefore loses its top and bottom. Anything you placed in the top 14% or bottom 35% for Reels' safe zones may sit right where the 4:5 crop cuts. Carousels have their own rule, set by the first card: "If the first card's image has a ratio between 4:5 and 1:1, it isn't cropped. A taller first image is center cropped to 4:5, and a wider one to 1:1."

The safe choice is a 4:5 or 1:1 file for feed placements, which Threads shows whole. Meta's ad sizes lists the feed ratios for Facebook and Instagram, and the free ad size checker reads a file's ratio and width before you upload.

Do you need an Instagram account to run Threads ads?

No longer, according to the top of Meta's pages. Both About ads on Threads and About supported account types for creating ads in Threads open with the same notice:

Starting in September 2026, matching usernames between Threads and Instagram profiles will no longer be required to run Threads ads. Businesses operating without an Instagram profile will also be able to launch ads on Threads directly using their native Threads profile. These changes are rolling out gradually and may not be available to you yet.

Lower on the account-types page, a note still says the old rule: "To run ads on Threads or manage your Threads account in Meta Business Suite, you must have a Threads account that has a matching username with an Instagram account in the same business portfolio." Meta's Create an ad on Threads page asks for less than either: your Threads profile "must be public and in the same business portfolio as a professional Instagram profile or Facebook Page."

Meta doesn't reconcile the three. The September notice is the newest and says the change is gradual, so if Ads Manager won't accept your Threads profile, the older rule may still apply to your account.

Which profile runs your ad on Threads?

It depends on what you have. Per the account-types page:

You haveWhat Ads Manager uses
A public Threads profile, plus an Instagram profile or Facebook Page in the same business portfolioYour Threads profile, by default
No Threads profile, but an Instagram profileYour Instagram profile
No Threads profile and no Instagram profileYour Facebook Page

You can pick a different one in the identity section, under Threads account, where you'll see Use Instagram account or Use Facebook Page.

Running without a Threads profile has a cost. Meta's note: "At this time, you can't reply to, remove or hide comments on your ads on Threads if you don't have a Threads profile and your ads were created only using an Instagram profile or Facebook Page." On a platform built around replies, that leaves the comments under your ad out of your hands. Meta's comment tools for ads covers what you can do once you can.

Whichever profile runs the ad, Meta's specs section starts with one more condition: "The Threads profile that runs your ad needs a profile picture. Without one, your ad won't be delivered on Threads."

What won't deliver on Threads?

Meta keeps an incompatibility list. If an ad uses any of these, it skips Threads while still running on your other placements:

  • Ad options: dynamic creative, dynamic language optimization, partnership ads, boosted posts from Instagram, existing Facebook carousel or multi-photo posts, existing Instagram carousel posts with a single call to action, Collection and Instant Experience.
  • Carousel ads that use placement asset customization. Meta notes customization "is supported for single image and video ads", so this only catches carousels.
  • Video formats: single video format, slideshow, info card and end card.
  • Performance goals: onsite leads, conversations, calls, conversions, 2-second video views, event responses, post engagement, unique reach, impressions and reminders set. Meta adds that "ThruPlay is currently supported."

Two notes cut the other way. "All ad objectives are currently supported for Threads, though some conversion locations and performance goals are not." And Advantage+ creative is allowed, with a catch: "Advantage+ creative enhancements aren't applied to the Threads version of your ad, which uses your original creative." Threads gets your original file, so it has to stand on its own.

Carousels are image-only: "Carousel ads are limited to images only at this time." Only some call-to-action buttons are supported; Meta's list runs from Apply now to Watch video, plus Install now, Use app and Play game for app ads.

How do Threads ads report?

Some numbers aren't final yet. The create page warns: "Certain metrics for the Threads feed placement are still in development, which includes clicks and post engagement." Meta says to use them "for directional guidance", so compare Threads with your other placements on results and cost per result rather than on clicks.

For brand safety, Meta points to the inventory filter, which "is available to help control the sensitivity level of the organic content your ads can appear next to."

Getting an ad ready for Threads

  1. Check whether your ad sets already include the Threads feed. They will if they use Advantage+ placements.
  2. Give the profile that runs the ad a profile picture.
  3. Send a 4:5 or 1:1 file at least 500 pixels wide, so the crop doesn't decide your layout.
  4. Keep primary text under 2,200 characters and leave URLs out of it.
  5. Burn in captions on video, and keep it under 500 seconds.
  6. If the ad uses dynamic creative, a partnership ad or a goal on the list above, expect it to skip Threads.
  7. Run it from a Threads profile if you want to answer replies.

Sources


Meta says the profile changes are rolling out gradually, so check the source and your own Ads Manager before planning around them.

Terrads makes feed ads at 4:5 and 1:1, so the version Threads shows is the layout you designed rather than a crop of a vertical file.